Ka-Bar Short Black Fighting Knife Review

The Ka-bar Black Fighting Knife is a variation of the USMC Fighting & Utility Knife. The Short version of the Ka-bar Black Fighting Knife has a 5 inch blade, compared to the 7 inch blade the standard model has.

The Basics

The Ka-Bar Short Black Fighting Knife has a 5-1/4 inch blade, and is 9-1/4 inches overall. The blade is made of 1095 high carbon steel. The handle is rubber; the sheath is leather.

My Review

I got my Kabar short a few years ago. When I first picked up the Short Fighting Knife, I noticed right away that it is a very well-balanced knife. Additionally, the rubber hand and guard make the knife very easy and safe to grip. This knife just feels good to me. It feels secure and powerful in my hand.

The blade has excellent penetration. I once had to use this knife to dispatch a wounded animal, for which it was very effective and proved quite up to the task. The basic leather sheath that comes with this knife is quite effective. It will be very tight at first, but should loosen up over time. Some people complain that the sheath is not much, but I find it to be great!

There are a couple things to watch out for with this knife. The biggest thing to be aware of is that this knife is not intended to be a highly corrosion resistant knife, so don't use it around saltwater or other corrosion inducing environments. Also, the blade is designed for strength and penetration, so you won't find it very useful for finer cutting and slicing jobs.

Conclusion: A great knife - one of my favorites for everyday use, especially where a large, strong knife is needed.

Adam Thompson is the owner of Thompson Outdoor Supply, where you can buy the Kabar Black Knife and other K-bar knives.

Thanks To : Fighting Knife Review

Trigeminal Neuralgia - The Effects of Gamma Knife Surgery on Trigeminal Neuralgia

People who suffer from Trigmenial Neuralgia often go through bouts of pain that can leave them debilitated or even push them to the verge of suicide. There have been many different types of treatments that are available to help relieve the pain. This article will focus on the treatment of Trigmenial Neuralgia with the gamma knife. It will examine the benefits and the effectiveness it has in the treatment of this condition.

Gamma Knife is basically the same as neurosurgery, except that it is non-invasive form of surgery. This means that there is no need to open the brain with incisions. One benefit of doing this type of surgery is that it reduces the complications that usually occur when people do traditional surgery. Gamma Knife is not a knife, contrary to what people believe. It is a very complex machine that uses energy to focus gamma beams onto the affected regions of the brain. It is during the treatment 201 beams of gamma radiation are blasted into the brain. Only the affected regions are targeted and other surrounding tissue are not in danger.

For the treatment of Trigeminal Neuralgia, Gamma Knife Surgery has been around for decades. Over the years advancement in technology such as imaging has helped to allow this type of surgery to have the high success rate it currently has.

The first use of the Gamma Knife on Trigeminal Neuralgia was in 1951. The main target of this radio surgery was the Trigeminal ganglion. The results over four decades were not highly successful. With the introduction of new technology such as high resolution imaging, the success rate increased. They were able to target the affected area much more easily.

Patients who usually have Gamma Knife surgery done on Trigmenial Neuralgia usually have an immediate reduction in the pain that they feel. The attacks from the condition are not completely removed, but it is substantially milder and it reduces over the weeks. Studies have shown that people who have Gamma Knife Surgery done have experienced a significant reduction in the pain they feel. The numbers of patients who report this is as high as 90%. This reduction usually occurs a month after treatment. The study was able to show that one third of the patients who had the treatment done experienced some deadness in the face. That same study showed that patients included in that number showed considerable improvements despite the numbness they experienced.

Gamma Knife surgery for Trigeminal neuralgia over the years has become associated as being a very safe and effective alternative to the treatment of the condition. The success is much better compared to traditional surgery and the complications and recovery time are not an issue.

For More information on Gamma Knife on Trigeminal Neuralgia [http://www.thetrigeminalneuralgia.com/gamma-knife-trigeminal-neuralgia.html] please visit the website. James Dalton has an entire website dedicated to Trigeminal Neuralgia [http://www.thetrigeminalneuralgia.com]. Here you will find out the latest information as well as the many different treatments that are available for this medical condition.

Thanks To : Best Tactical Knife Tactical Knife Review Fighting Knife Review

Tactical Tomahawk

The Tomahawk was a kind of axe used by the Native Americans. Originally the heads were made of stone, but later ones were made from iron or brass. The iron and brass ones were introduces by the Europeans, and were often traded for food and provision. Soon after the Native Americans adopted the metal tomahawk heads and learned how to make them. They were used as a general purpose tool , as well as a hand to hand or a throwing weapon. They also often had a tobacco pipe built in to the shaft with the pipe bowl on the other end of the axe head. These tomahawks were a powerful symbol of the choice between Europeans and the native Americans, One end a peace pipe the other a killing instrument.

Enter modern era. Tomahawks have made something of a come back recently. Most significantly in the Vietnam war, were soldiers started requesting them and buying them to carry with them into battle. They were manly used as a multi-purpose tool more then as a combat weapon ,although they were often used for that as well. They were designed by Peter Lagana, they had a reversible spike ,wooden handle and a leather sheath.

In 2001, the "Vietnam Tomahawk" again re-emerged made by the American Tomahawk Company and Ernest Emerson of the custom knife company Emerson Knifes. Recent tomahawk designs include synthetic shafts and different head shapes. Modern tomahawks are crafted from drop forged, differentially heat treated, alloy steel. The differential heat treatment allows for the chopping portion and the spike to be harder than the middle section allowing for a shock resistant body with a durable temper.

Tomahawk throwing has been a popular activity within American historical re-enactment groups. Its also a great hobby for anyone to take up,its loads of fun. Recently there new forms of martial arts, that utilize tomahawks have showed up such as Okichitaw.

In Okichitaw, they have begun to revive tomahawk fighting techniques that had been used in the colonial era. Tomahawks today are made by master craftsmen, and there is a category in competitive knife trowing which includes tomahawks .

To read more and to find great deals on these wonderful tools go here http://hubpages.com/hub/Tactical-tomahawks.

Recommend : Hunting Knife Review

Honing a Knife Blade

For those who are new to the world of knife sharpening, often the most challenging part is knowing when to stop. How do you know when the knife is sharp enough? How do you get it to that point?

When sharpening a knife, sharpen until you see burrs. Then, turn the knife over, and sharpen the other side. The honing process will remove these burs, but they are important. Burrs are the only way to know that you have removed enough of the metal to sharpen the blade.

Once the blade has been sharpened using the rougher grit of your sharpener, stone, or file, then you will need to refine the blade. This is usually done with the opposite side of the sharpener, which has a smoother grit. Honing the blade can also be done with a leather strop. Simply repeat the process of sharpening the knife with this finer grit.

Some experienced knife sharpeners test the sharpness of the blade against an object. These may range from cutting across a nylon paint brush, to shaving the hair on your arm, to testing it on your thumb. If testing against your thumb, hold your thumb parallel or perpendicular to the blade and carefully slide the pad of your thumb across - not down - the blade. It can take quite some time to get a feel for this method, however, and you should not try it as a beginning knife sharpener. If you do it incorrectly, it is possible to slice your finger open. Another test is to hold the edge lightly against your fingernail, at about a 30 degree angle. Press down lightly. If it begins to cut into your nail, it is sharp. If it slips, the blade is dull. This can also be done using a pencil, a plastic pen, or another relatively soft solid object.

These tests, however, will not determine whether the edge has a burr or other imperfection. Burrs are naturally caused by the sharpening process. They are thin projections on the very edge of the knife. Usually, they are pushed left or right due to pressure in the sharpening process. Sometimes they point directly off the edge of the knife; this is called a "wire edge." Because the burrs are very thin, this may seem like a very sharp edge. However, it is too thin, and the first use of the blade will break it off, leaving you with a very dull knife. If you seem to be getting very sharp knives after you use your knife sharpener, but they become dull within just one or two uses, this may be the culprit.

The easiest way for beginners to see burrs on the knife edge is to hold the blade up to the light. The light should bounce off the blade uniformly, except for where there is a burr. It can also be felt using your fingernail, although again, you should avoid using your fingers to test the blade of the knife unless you know you will not cut yourself.

Sharpen 'Em offers a large selection of quality knife sharpeners from all the best manufacturers, from low-budget hand held sharpeners to high-end electric sharpeners.

See Also : Hunting Knife Reviews Tactical Knifes Fighting Knife Reviews

Finding the Right Chef's Knife Case

Caterers need to find suppliers who chef's equipment completely, including quality chef's knife cases. Professional chefs carry their own knives and they are interested in protecting their investment. That's why they choose to store their knives in a knife rack, block, wallet, or knife case.

To help you choose quality storage for your chef knives, here are a few product suggestions.

We start with the Vogue chef's knife case, which comes in two different sizes. Both are made from durable nylon that can be easily cleaned. They have zippered compartments and are reinforced to prevent damage at the ends from protruding knives. One case fits up to ten pieces, with Velcro fasteners and a clip-on strap for carrying over your shoulder.

The other chef's knife case has a flap that folds over and is secured by two clip fasteners at the front. This one has a capacity for up to sixteen pieces, and the carry strap is reinforced with padding at the shoulder for extra support.

These pieces are long enough to fit the larger knives in a chef set, like bread knives, carving knives, and even roasting forks and knife sharpeners. They work well with some of the more professional sets of knives, like Hygiplas, Victorinox, Deglon, and Chef Works.

There are many options when choosing adequate storage for chef knives, ones that fit every budget. Apprentices may choose one of the inexpensive canvas knife wallets that have either ten or fourteen compartments and, in some cases, one large pocket for either books or other tools.

Then there are knife boxes made from tough, durable plastic. There is a large model that even comes with a removable tray and can be fitted with a padlock for a little more security, if necessary.

For something a little more stylish, chefs can choose a leatherette briefcase made by Chef Works. This can serve as a chef's knife case that is a little more portable, and looks very much like a regular piece of luggage. It has a zipper pouch in front and the carrying handle and padded shoulder strap make it easy to carry.

Speaking of Chef Works, they also make an excellent knife case that is made from a durable Cordura nylon. The case folds out to reveal seventeen pockets in two sections, both of which are covered with the same material for extra protection. The pockets are sturdy enough to prevent movement while in the case, and two clips secure this handsome looking case with a fold-over flap.

It is also worth remembering traditional knife blocks and knife racks in a variety of styles. Some of the better knife racks are magnetic, mounted directly to the wall. Others are made from a durable plastic that is washable. It is also possible to acquire padlocks for those chef's knife cases that can be secured to provide peace of mind and protection.

If you're looking for quality storage for your chef knives, take at look at some of the fine knife cases and accessories available from suppliers to keep your chef knives safe, secure, and always ready for use.

Welcome to Nisbets - the UK's largest supplier of catering equipment with 25 years experience in the industry.For further information regarding our range of chef knife case s, please visit our website at http://www.nisbets.co.uk

See Also : Tactical Knifes Fighting Knife Reviews Best Tactical Knife

Gerber Knives and Knife Sharpeners

Gerber knives and knife sharpeners are some of the most well-known models in the industry. Founded seventy years ago, today Gerber offers high-quality knives, sharpeners, and accessories. Specializing in multi tools, fixed blade knives, and pocketknives, as well as sharpening kits and other accessories, they are a well-known name in the world of knives and cutlery.

Gerber began almost accidentally, by Joseph Gerber, an advertising executive. The first knives were kitchen cutlery sets commissioned as a gift for his advertising clients. These high-quality knife sets were soon offered through Abercrombie and Fitch catalogs, and Gerber quit his advertising job to run Gerber Legendary Blades full-time. Gerber knives continue to be manufactured in Portland, and today they are the second biggest multi-tool manufacturer in the country.

Today, Gerber is especially well-known among hunters, who favor their knives as hunting knives. There are many knives designed particularly for hunting purposes. One of the most popular Gerber hunting knives is the Freeman Hunter, with a polished wooden handle and high-quality grip for rugged outdoor use. The Freeman knife is relatively short, so it is recommended for skinning smaller animals.

Gerber Firestorm knives are a little larger, so they are better suited to larger game. These are usually the most widely used of all hunting knives because of their versatile length. The blade has a tanto tip, and is surgical stainless.

The Harsey fixed blade hunting knife features a relatively long 5 1/4" blade in stainless steel, with a total length of 10 1/2". The Magnum Camo Jr. is a 2 3/4" blade knife, known for its durable and extra-sharp edge, as well as a fiberglass-reinforced handle. Popular Gerber knives are both folding blade and fixed blade, in a wide range of styles. Other tools, such as the Flik multi-tool, also remain quite popular with those who already use a selection of Gerber knives. Today, there are over 120 different knife designs from which you can choose. They specialize in kitchen cutlery, hunting and tactical knives, so you're sure to find a knife suitable for any purpose.

Gerber is known for high-quality materials and the latest technology. All of the handles are specifically designed to hold up to a lifetime of wear no matter how you use the knife. Even after seven decades of knife manufacturing, Gerber remains at the forefront of knife technology. The vast majority of Gerber knives feature high carbon stainless steel or surgical stainless blades, which are known for being easy to sharpen and hold a very sharp edge. Many experienced hunters can feel a change in how the knife cuts as it begins to grow dull, which allows them to easily identify when it's time to sharpen their Gerber knife.

Many Gerber knife sharpeners are portable, making them a good choice to take along with your Gerber hunting knife for outdoor activities. The range of Gerber sharpeners, including ceramic and diamond sharpeners that will fit in your pocket or come with a pocket clip, will make it easy to sharpen the stainless steel blade to a very sharp edge.

Sharpen 'Em is the perfect place to go to find a sharpener that will help take care of your Gerber knives.

Thanks To : Tactical Knife Review Tactical Knife Hunting Knife Review

Best Tactical Knife Tips

Whether you are an avid hunter or just a guy or gal that carries an EDC (everyday carry) pocket knife, choosing the best tactical knife for your situation can save you a lot of time and problems. One of the most common knives today is called the "tactical" knife.A tactical knife is thought of by many as a pocket knife that is used primarily by military and law enforcement and this is just not the case. If you want to look at knives that way then you will have to resign yourself to the fact that any knife can be a tactical knife whether it is a folder or a fixed blade type.

The tactical knife has been in production for years and yes they have been used for military and law enforcement applications by such people as soldiers and police, but over the years these excellent tools have found their way into the mainstream for such things as hunting, fishing and everyday carry by the masses. The modern tactical knife has been modified and adapted to other chores besides military and law enforcement these days. When looking for the best tactical knife for you here are some things to consider before purchasing one. Do you want your tactical knife to be a folder or be a fixed blade? If you are going to carry a knife everyday for work or just to have one then you will want a folder and if you are geared toward outdoor activity then you will want to maybe consider a fixed blade. Stick to high quality stainless steels made in either USA, Japan, Sweden and Germany. Do not settle for the stainless steels out of China. The Xcrmo13, Xcrmo8,Xcrmo9 etc. steels as they do not hold and edge or perform for the long term. Is your tactical knife for military or law enforcement work? If it is then you will want to consider an auto opener versus a manual opener for deployment and execution of chores as the job demands.

Are you a fireman or some form of rescue or first responder? If so many people in this area use a tactical folder that has a rounded point and is referred to as a rescue folder or rescue fixed blade. This is very common is the search and rescue fields. Remember, tactical refers to a knife that you can open with one hand so that you can have your other hand free for other things. This is very important. One key thing to remember about choosing the best tactical knife for you is that you are going to be using it. You want it to have a comfortable feel in the hand and fit ergonomically in your hand so that you can work with it for long periods of time without your hand cramping up on you. This is a very important consideration to make. If a tactical knife handle is to thin in your hand then it can move around in your hand and be uncomfortable. You want your tactical knife to fill up your hand properly and leave no gaps for it to slip. The last thing to consider is the carry option that you will employ. Will you carry your tactical folding knife using a pocket clip? Will you carry your tactical folder in a belt sheath? If a fixed blade will you carry in a sheath on your belt or on a MOLLE compatible vest?

If you have found this information helpful and would like to learn more about the best tactical knife and all kinds of knives both kitchen and sporting and how to maintain them, then please visit: www.mistersharpstuff.com

My Links : Tactical Knife Review Fighting Knife Reviews

What to Look For in a Hunting Survival Knife

As many experienced hunters know, it's not always a good idea to shop for hunting or survival equipment solely based on price. Imagine being out in the bush and being placed in a survival situation and being equipped with cheap, inferior survival equipment. You will be wishing that you spent the extra $20 to buy a better hunting survival knife.

Likely the most important item that an outdoorsman can carry is a good hunting survival knife. If placed in danger by a wild animal or needing to use it to survive, a good survival knife can make the difference between surviving and perishing.

The problem is that not just any knife will do the trick. Sure there are all kinds of cheap survival knives on the market that claim to be able to do everything a more expensive knife can do, but for less money. Unfortunately when it comes to knives, low price also means low quality.

Considering that many hunting survival knives have hollow handles that are attached to the base of the knife by a number of means, this in itself could become a problem if you were forced to use the knife in a real survival situation. The most important design feature of a good hunting survival knife is one where the blade and the handle are one solid piece of steel. This will ensure that the handle does not fall off when the knife is put to the test. Many cheap knives look good until they are put to the test and they fail. In a survival situation, whether your knife performs well or doesn't will mean the difference between life and death.

The other option that is important is having a serrated edge on the top. This will help with a number of tasks that need to be done like sawing through small branches for firewood.

Although a fixed blade knife is not as handy as a pocket knife since it won't fit in your pocket, it certainly will perform well for you if the situation arises. Ideally carrying 2 knives would be better, but if limited to a few items, a fixed blade hunting survival knife will be your best option.

Blake operates a website called http://survivalknifeshop.com which provides listings of many different types of survival knives for sale, including hunting survival knives [http://survivalknifeshop.com/Survival-Knives/hunting-survival-knives].

Thanks To : Fighting Knife Reviews Best Tactical Knife Tactical Knife Reviews

Knife Sharpening - A Critical Task In The Workshop

Since the first stone tools were used centuries ago, man has tried to find the best way to keep cutting edges sharp. As good metal blades were developed in more recent years, knife sharpening became a critical part of tool maintenance. Only with a very sharp blade could our ancestors cut and trim the things they needed to survive from day to day.

Colonial-period residents often created communities around a mill that processed grain and made sure that the village had a blacksmith. Chief among the tasks for many craftsmen was tool sharpening, a practice that has continued today. Those early settlers often used very hard stone to sharpen their blades. In many cases, the stone was round and worked on the same principle as a grist mill, with the stone turning slowly while the individual held a blade against the stone surface.

Today's sharpening equipment has more power than the old foot-driven or water driven wheels. In addition, the electrical sharpening wheels are a great improvement over the whetstone that was used by hand. Modern knives and other tools can be sharpened in much less time, with less effort, because of the modern power sharpener.

For the person who is setting up an efficient home workshop, or the professional who makes his living with tools, a sharpener is an essential piece of equipment. A knife sharpener and/or a blade sharpener from one of several quality suppliers can be a welcome addition to the workshop. For example, the small but efficient bench grinder is excellent for sharpening tools used in woodworking and for gardening/lawn tools as well.

One example of a quality knife and scissor sharpener is the Tormek, a bench-top grinder that uses water in small amounts to reduce heat and friction. When this equipment is purchased, the individual will find a leather strop included. (Some experience craftsmen recommend a paper wheel for honing blade edges.)

Those with some years of experience in craftsmanship that requires blades will urge the shopper to look for versatility in blade sharpening equipment. The sharpener must be large enough and durable enough to handle large blades and some provision must be made for strop and honing blade edges. Buying from a reputable and stable company is important as well, since there may come a time when it is necessary to get replacement parts or service. All these factors are important when purchasing sharpening equipment that can cost several hundred dollars.

Sharpening equipment comes in a wide variety of sizes, from the smaller items used occasionally in the workshop to the largest commercial grinders and specialty sharpening equipment. The smaller equipment will work well for the home craftsman and handyman, especially because they are less expensive and quite portable.

Some home handymen prefer to sharpen knives and small blades by hand, using a whetstone. Others opt for the small, electric wheel for their sharpening needs. These wheels are made of very tough abrasive materials that provide years of service. For those just beginning to work with blades and knives in the workshop, several companies provide brochures, manuals and videos that help the amateur become more proficient at keeping those essential blades clean and sharp.

John Bakers's detailed papers can be encountered on a lot of web publications tied to information on drill bit sharpening. You can discover his abstracts on sharpen drill bits over at http://www.insidewoodworking.com/sharpening/howtosharpendrillbits.html and different sources for sharpen drill bits information.

My Links : Fighting Knife Review Tactical Knife Review Best Tactical Knife

Knife Rights and Legislation - The American Knife and Tool Institute

When it comes to knives, guns, and other weapons, there is always plenty of controversy surrounding their use, and subsequently, over legislation governing their use. What length of knife can be carried on you for various purposes? What type of weapons can be carried legally across borders? What types of permits are needed for these actions? Many of these issues boil down to whether ordinary citizens are free to carry any knives that they wish, or whether knife carrying should be heavily regulated.

As you might expect, multiple organizations have formed on both sides of this line. For those who collect or use knives, the American Knife & Tool Institute is the largest such organization. The American Knife and Tool Institute is a non-profit group representing the knife industry, including manufacturers, retailers, custom knife makers, and those who carry or collect knives. Whether you carry utility knives when hunting, keep a pocketknife in your pocket for everyday needs, or simply collect knives in your home, the American Knife & Tool Institute is an organization formed to support your right to do so freely.

The AKTI works to support sensible legislation when it comes to knifes. Their mission is to provide education on safe knife carrying and use, and to support legislation in line with their goals. Founded in 1997, AKTI is a unified voice to represent those in the knife-making and knife-using community. Its purpose is to educate the American public about the various types of knives and related tools that exist, and how to carry and use them properly. Besides education about knife types and the safe and responsible use of knives, the American Knife and Tool Institute also works to encourage knife legislation supporting its goals.

The American Knife and Tool Institute Executive Committee is comprised of industry leaders who meet to provide direction to the Institute programs. AKTI is most well known for its involvement in knife-related legislation throughout the United States, as well as on the federal level. The current and pending legislation monitored by the American Knife and Tool Institute ranges from customs definitions which govern which types of knives can be legally carried across borders to the length of knife that is legal to carry in your pocket. The AKTI website is constantly updated with knife-related legislation and other news events around the country, in addition to the contact information for relevant government officials and knife-rights support groups in your area.

The American Knife and Tool Institute is just one of the many ways for knife owners and enthusiasts to get involved at a grassroots level. It enjoys the support of the National Rifle Association, United States Sportsmen's Alliance, Wildlife Forever, Whitetails Unlimited, and many related outdoorsmen's clubs. If you routinely carry knives or use them when hunting, fishing, or engaging in other outdoor activities, consider supporting your rights through the AKTI and other organizations. Even if you don't belong to such an organization, always carry and use your knives responsibly to set a good example.

Sharpen 'Em offers a large selection of quality knife sharpeners from all the best manufacturers, from low-budget hand held sharpeners to high-end electric sharpeners.

Tags : Hunting Knife Review

A Tool For Every Job - About the Hammer Drill

Regular cordless and electric drills are invaluable tools for use from the home to the job site, but they are not equipped for strenuous jobs such as drilling through concrete, masonry or granite. Hammer drills and rotary hammers are designed for drilling through these harder materials. Both hammer drills and rotary hammers combine the pounding action of a hammer with the rotation of a drill to make penetrating hard, brittle surfaces possible. The rotary hammer is the hammer drill's heavier duty counterpart that can perform more demanding drilling jobs. A strong drill bit that pulses back and forth as it rotates provides the ability to drill through harder materials than would be possible with a standard drill. Attempting to drill into a hard surface such as concrete or masonry using a standard drill is a common error. Though a seemingly innocent enough mistake, attempting to penetrate a surface for which the drill is not designed can damage the drill, possibly irreparably.

Installing outdoor lighting fixtures, hanging outdoor art pieces and affixing flagpole hangers to the brick, cement stucco or masonry exterior of a home are common household projects that call for the pulsing action and power of a hammer drill. If you are experienced enough to take on such jobs yourself, awareness of the placement of any electrical wiring prior to drilling into the exterior of a home is essential.

Tile, concrete or cement block walls in home interiors may also present the need for a tool such as a hammer drill. Even for small jobs such as hanging a towel rod using a pilot hole and fastener, a hammer drill is necessary if the wall material is concrete.

Here are a few basic tips to keep in mind when using a hammer drill:

• Wear goggles or other eye protection to prevent dust from entering your eyes while drilling.


• Always use the type of drill bit for which the drill is designed (most hammer drills use SDS).


• Avoid contact with a drill bit immediately after use, as the bit will be hot.

To protect yourself and your hammer drill, thoroughly reading documentation accompanying any power tool prior to use is always advised.

Maria Polidoro is the owner of Ace Tool Online, a leading provider of electric and cordless power tools headquartered in Wantagh, New York. Ace Tool stocks the latest power tools, parts and accessories and houses a full service center for major power tool brands. For information and to purchase Champion Tools [http://www.acetoolonline.com/Brands-s/Champion-Cutting-Tools-s/8179.htm], Milwaukee cordless tools, Amana Tools and virtually all other major brands, please visit Ace Tool Online.

Related : Fighting Knife Reviews Hunting Knife Review Fighting Knife Review

Knife Quality - What to Look For When Selecting Knives

With knives, like any other tool, it is always best to buy
the best quality you can afford. Whatever the purpose you
have for the knife - from cooking to whittling - the
pleasure to be obtained from using a well-made tool
enhances the entire process.

On the other hand, the frustration of using a poorly-made
tool takes away from the pleasure in the job, and therefore
the end result of your effort is often inferior to your
intentions.

To select the best quality knife, it is helpful first to
identify the main uses to which the knife will be put. A
kitchen knife that is used primarily for chopping
vegetables will have a very different blade and heft than a
knife that is used for gutting fish.

With respect to cooking, the most versatile is the chef's
knife; the workhorse of the kitchen. If you could only have
one knife, this would be the one to choose. If you are
investing in a knife set, make sure the set includes at
least the chef's knife, a paring knife, and a serrated knife.

To choose a good quality knife, it is helpful to know the
parts of a knife and what to look for in making your
selection.

1. The Point is the part of the blade for piercing.

2. The Tip includes the point, and is the upper quarter of
the blade. It is used for the cutting and separating of
smaller items.

3. The Center is where most of the knife's work happens,
using long slicing motions. Since it receives the most use,
it dulls the quickest.

4. The Edge is the entire sharp part of the blade.

5. The Spine is the opposite part of the blade, or the un-
sharpened top.

6. The Heel is the lower part of the blade, and is used to
cut through tough items that involve using weight or force.

7. The Bolster is a thicker strip of steel between the
blade and the handle. The bolster has two functions:
balance and protection. The band of steel helps prevent the
hand from accidentally slipping forward and across the
blade. Bolsters are found only on forged knives, and not on
stamped knives. It is one of the elements to look at
carefully when selecting a knife.

8. The Handle or Scales can be made of wood, metal, or
synthetic material. Some synthetic materials are a better
choice than wood or metal because they can withstand high
temperatures or can provide better friction for grip.
Consider these factors as you make your decisions.

9. The Tang is the part of the blade that extends into the
handle. In cheap knives, this part of the knife is often a
cost short-cut because it isn't always visible. But the
Tang is an important part of the knife, not only for
balance, but also for durability. In good knives, the Tang
usually extends all the way to the butt of the handle.

A final suggestion. Keep your knives sharp. Not only is it
more elegant to use a properly maintained tool, but sharp
knives are safer than dull knives (which are dangerous);
with a dull knife, you must apply more pressure, and your
hand is more likely to slip.

Daniel Lebarge, journalist and internet publisher, is a contributing writer for Knife Line [http://knifeli.com], offering valuable free information about the care and selection of knives. Articles by Daniel are also found at All Boots [http://aboots.com/] and FMP Tools [http://fmptools.com].

My Links : Best Tactical Knifes Tactical Knife

Fixed Blade Knives

When shopping for knives, there are generally two different types to choose from. The kind you select should be based upon your individual needs. There are fixed blade knives, and then there are folding knives. It has become common practice for different brands of knives to take on the name of the person or company that created them. The "bowie knife," for example, was created by Jim Bowie, a man affiliated with the Alamo. The name does little to describe the knife itself, but is often associated with what the tool is used for.

Folding knives offer a way to easily transport the tool. You can fold the blade into a protective casing so that it can be carried in your pocket with no risk of harming you or your clothing. They are also known as "pocket knives." Most are legal to have on your person, so long as the blade is not too large. Two inches is a proper size for these knives. They offer more convenience than the fixed blade knives since they can be easily transported until they are needed. They have a safety lock that is required to be pressed before the blade will close within the knife handle.

These knives tend to be less strong than fixed blade knives. They are much lighter than other form, which makes them so easy to carry around in your pocket. They are typically designed for use while hunting, camping, or fishing. Folding knives that offer a spring mechanism to unveil the knife is known as a "switchblade." These are handy because they are easy to open with one hand. The blade on these is typically longer than the standard two inches, which may make them illegal to carry.

Fixed blade knives are just that, fixed. They do not offer a way to close the knife within itself. Instead, these come with a case that the blade fits down into. Some cases offer a loop on the back so that it can be worn on your belt. These knives are typically used for hunting, and are better at cutting animals once they have been killed while still in the woods. They can also be used to gather pieces of wood from trees in order to make a fire.

The handles of fixed blade knives used for hunting can come in a number of intricate designs. Some are worth a great deal of money just for the intricate design the handle offers. The handle can be crafted from a number of various materials, including bone, rubber, wood, and other substances. With no moving parts, you will have less worry about the different pieces of the knife malfunctioning or otherwise not properly working.

Other fixed blade knives can be used for various reasons. One such is self-defense. These are typically similar to hunting knives, but they may be more durable than most. They are a tool that can be used to save yourself if you get stuck in a life altering situation, such as being lost in the woods. They can be used to cut firewood, break the glass of a vehicle, and to spear fish from a river. Fixed blade knives come in a number of different sizes, many of which are not acceptable to carry with you on a daily basis. A machete, for example, is a tactical knife with a large blade for clearing brush and other materials out of your way. They could also be used as weapons, though that is not the main intention of these tools.

Nicole Roberts
Here at WeKnoKnives.com, where we aren't dull when it comes to knives! We carry the best fixed blade knives here, and have the best prices on the web, and we are looking to help in your situation.

See Also : Hunting Knife Review Tactical Knife

Wedding Knife and Cake Server Set - 5 Reasons to Use Them

Have you been told that a wedding knife and cake server set is a necessity for your wedding or wedding reception? Almost everybody has and if you are going traditional, than yes it is a must. Why, you ask, is it necessary? There really is no point except to have fun, right? Wrong! There is more to the act of cutting and serving the cake than just having the fun and excitement in celebrating. Here are five reasons and explanations for why you must have a wedding knife and cake server set:

• 
  Cut Your Wedding Cake: First and foremost, the knife and cake server were meant for this particular event. Cutting the wedding cake symbolizes unity and commitment. The very act of cutting the cake together, is an act of the bride and groom working jointly as one for the first time. The brides hand is the first to be placed upon the knife and the groom's hand is set on top of hers. An act symbolizing that the groom is helping the bride and showing that he will gently guide her in their future life.



• 
  Eating the Cake: When actually eating the cake, the server is set underneath the piece that has been cut and drawn out of the rest of the bottom layer and then set on the table. The bride takes the first piece and gives it to the groom, as a symbol of commitment and submission. The groom in turn does the same to the bride.



• 
  Serve Your Guests/ Cater to them: After the cake cutting is completed the bride cuts the cake and serves all of her guests. This also is a ritual that symbolizes service and love for your friends and neighbors. If you serve them, they in turn will serve you. But, not only is it a symbol, it is common courtesy to serve your guests to thank them for their attendance and help in celebrating your marriage.



• 
  Anticipation and Fun: The utensils alone bring a joy and anticipation of their own. When your guests go by the wedding table and see the knife and cake server they will know what event you are planning to have and they will want to be a part of it. It also acts as a reminder that the bride and groom will be making a very sacred commitment.



• 
  Dual Use: How often can you find a tool that has dual action? Not very often. These will cut and serve all at the same time without changing tools and wasting time setting down one and picking up another. There are two utensils in the package, but if desired the cake server is for your own convenience to cut and serve and most importantly, to save time.

If you didn't have the wedding knife and cake server set, all this tradition would be missed, not to mention the fun and excitement it provides as well. To many people this is a very special event and to others a fun part of the ceremony. Either way, it can't be done without the small, but very important cutting and serving utensils.

Zurchers Party & Wedding Supplies Store: Your source for all your wedding and party tips and ideas. Zurchers carries thousands of discount party & wedding supplies at our online wedding store.

Please visit our site for the very best everyday low prices on wedding knife & cake server sets. Zurchers offers party & wedding supplies at steep discount pricing. There you will also find a party & wedding blog with decorating tips and more by professional party & wedding event planners. With over 50 years of party & wedding event experience you'll be sure to get the help you need when planning your next party, wedding, or other celebration.

Thanks To : Tactical Knife Tactical Knifes Hunting Knife Review

Take Care of Your Tools With Knife Sharpening

Ever since the very first tool was made it was seen just how important it was to sharpen knives. In colonial times when a new settlement was created a grist mill was normally the very first building to be built. These were used to sharpen tools, without sharp tools the speed of development will slow down dramatically.

Modern sharpening tools work in the same way as these old mills and whet stones. Modern equivalents are however much more powerful. Grinding wheels used to be powered by water, however they are now powered by electricity.

What to Look for in a Knife Sharpener

A knife sharpener is an extremely useful tool which will last for a number of years. There are various different types of knife sharpeners which all serve the same basic purpose. A table top grinder is very useful for sharpening the blades of gardening tools and axe blades.

You will commonly need to sharpen your chain saw blades on a regular basis to make sure that everything is cut evenly. To sharpen these chain saws you need specialist equipment. A drill bit style attachment is placed into the drill and rotates as the chain saw blade moves against it. When you are choosing a chain saw sharpener to buy you should find one that has multiple tips, these will wear down quickly.

A very high quality knife sharpener is the Tormek, this is mounted on the top of a bench and uses water to prevent any friction which would wear the machine out quickly. This grinder comes with a leather strop, however some other people suggest using a paper wheel to strop the edges of the knife.

When choosing a knife sharpener the most important thing is to consider the versatility. You should choose a device which can sharpen as many different types of blades possible, find out if it can sharpen longer blades, and make sure that it can strop the edges well. Also check how long the machine will last for, and find out how easy it is to get any spare parts. Some knife sharpening equipment can cost a lot of money.

Sharpeners for Everyday Uses

Heavy duty sharpening tools are probably only really needed for serious woodworkers or anyone that uses a chainsaw on a regular basis. For the general consumer you can get cheaper and more portable models.

You would find a basic handheld knife sharpener in a butchers shop, this is a very simple tool which does not need electricity. There are many other variations, including machines where you pass the blade of the knife between two sharpening wheels. A knife is sharpened when the knife is drawn at a 30 degree angle on an abrasive material.

You don't need to use electric tools if you don't want to, you can get good results using hand sharpeners. The skill is getting the angle right so that you can sharpen your blades as best as possible. There are plenty of classes which you can go to so you can learn more about knife sharpening.

Ray Walberg frequently produces detailed reports on issues related to electric chainsaw sharpeners and sharpening chain saws. His articles on chain sharpener can be discovered on his webpage as well as many different online publications.

Related : Best Tactical Knife Tactical Knife Hunting Knife Reviews

Chef Knives - Buying a Kitchen Knife Set

Most knife experts will tell you to never buy a knife set. I'm here to say that a proper knife set is a cook's best friend and kitchen's best asset. Here's how to decide if a knife block is right for you, find the perfect knife set, and maintain it for a lifetime.

Who is a knife set really for?

The sort of person who really gets the best out of a knife set is someone who loves to prepare nice meals from fresh ingredients, who has a kitchen that they adore and who really basks in how homey and comfortable or sleek and stylish it is. A knife block works great for someone who is very busy, and who doesn't mind making dinner, but knows that in order to make it more enjoyable, they need to make the prep work run smoother. If they had more time, or if it were easier to prepare it, they would use fresh produce in every meal. A knife set is best for someone who doesn't have very much time to do research and wants to find a their new tools efficiently.

Why are so many people against knife blocks then?

If you've asked around about buying a knife set, you probably were told - don't do it! Why is that? Well, most knife experts are severe knife enthusiasts. In most cases they are knife collectors. They know all about steel types and edge geometry and patinas and forging techniques and, well, everything you could possibly know about a knife. While this is all very useful information, it is much more than even the greatest chef bothers to know.

These knife experts have sampled hundreds of knives, and they all have very set opinions on what the best knife in each category of knives is. Someone with the time to read hundreds of reviews of each type of knife that they'll need will have a non-matching set of the best knives in the world. If you don't have much time though, and if you want your knives to match, it's really in your best interest to purchase a set.

The other argument that most knife experts make is that sets are loaded with "filler knives that you'll never use," or that "all you ever need is a chef knife." I'm going to say it once and for all. Yes, you can eek by with just a chef knife, and yes, you will use your chef knife more than any other knife that you have. But try to use your chef knife to carve a pumpkin, remove the scales from a fish, or slice a loaf of freshly baked Italian bread and you will see that while you don't do those jobs very often, when you do them you want the proper knife for the job. It's like your stand mixer. While the paddle attachment gets 95% of the action, you still need the whisk attachment for whipped cream and the dough hook for dough.

How to choose your knife set?

The chef knife will be getting the most usage, so you will want to select your set predominantly on it. You can find streams and streams of information on choosing a chef knife, but here's what's most important - the handle must fit comfortably in your hands, and the blade should be made of decent steel. How can you tell about the steel? The simplest answer is that if it is a well-known company than they probably use decent steel. If you really want a valuable opinion, call the professional who you will have sharpen your knives and ask for a recommendation. If you plan to purchase online and won't be able to go in store and hold the knives in your hand, look for a handle that seems ergonomic and has no hard corners, which may cause calluses.

Second in line is the appearance of the set. Now I'm not being vain, but really, being able to display your knives in a beautiful block right out on the counter top adds a real touch of prowess to any kitchen. So chose a set that you'll be proud to have out on display. You'll most likely see it everyday, so be sure that it goes well with the appearance of the kitchen and that you feel glad to see it in your home.

Finally, you will also want to consider the other knives that are in the set. Why isn't this first on the list? There are no "useless" knives. What's most important when it comes to the knives in your block is knowing what tasks to use them for. Chances are if it's in your block it has a special purpose and it is worth if for you to take some time and find out how to use it. Ask a salesperson, a chef friend, or do a quick search online for each knife in your set and how it should be used. This will save you hours of frustration in kitchen, trying to use a santoku to debone a fish. If you knife set does not include a honing/sharpening steel you will need to purchase one and learn how to use it in order to maintain your knives. Your steel will not need to be stored in any special way, but if it is not included in your set you must consider this as an added expense.

How to maintain your set?

A knife set should be cared for specially in only two ways. Always insert completely dry, clean knives into the block to prevent bacteria from going inside, and whenever you are vacuuming, carefully remove the knives from your block and suck out any debris that may have fallen into the slots to prevent your knives from getting scratched or dented. Otherwise, maintain each knife as it normally should be. Hand wash your knives, only use them on wooden or rubber cutting boards, and use each knife for it's proper job. Your chef knife should be honed after each half-hour of use and should be sharpened professionally at least once or twice per year.

Any extra bonuses?

This is actually why I love knife sets so much. A properly chosen and well maintained set will last a lifetime, becoming your best friend in the kitchen and perhaps someday, a family heirloom.

Wait! Do you want a knife that can conquer anything, zooming through carrots and dicing onions without tears? Or will you end up with the dollar store special trying to hack through a cucumber? Treat yourself to knife block that you know will do the job from the best online source for Chef Knife Sets [http://www.chefknifecentral.com/] and Steak Knife Sets [http://www.chefknifecentral.com/].

Visit : Tactical Knife Review Tactical Knife Reviews Best Tactical Knife

Bear Grylls Gerber Knife - Any Good?

The new bear Grylls Gerber knife is due to be released on November 15th 2010 after being pushed back two weeks from the original November 1st 2010 date. The knife debuted at the Outdoor retailers convention where they gave away the firesteel that will be attached to the sheath of the Bear Grylls Gerber knife. It was arguably the best give away during the whole show.

Features of the Survivor Series Gerber knife

The blade of the 2010 Bear Grylls knife is a partially serrated heavy-duty cutting tool. It looks very similar to the blade that is used on the Gerber LMF or prodigy knife lines. At the bolster of the knife you will find two lanyard holes in addition to the one on the butt of the knife. The combination of these three holes makes this knife extremely easy to attach to a spear or tool.

The Handle

The Handle of the 2010 Bear Grylls knife features a but cap that has a hammer like surface and a lanyard rope with a survival whistle attached to it. The grip is a rubber material and is extremely comfortable to hold.

The Sheath

The sheath is its own little monster. This thing has several different options to be attached to the belt and as made of kydex and nylon. The sheath holds and comes with a firesteel that is attached to the front of it and a sharpener that is hidden under the kydex portion of the sheath. Another added feature is that the knife comes with a mini survival guidebook that also stores securely and neatly in the sheath.

All in all this knife looks like a pretty sweet deal. Priced at $59.99 a far cry from the price of the last Man vs. Wild designed knife that hit the market at a whopping 700 bucks.

Pre orders are now being taken. If you are reading this post November 2010 the knife should be available.

For pictures and ordering information visit Bear Grylls Gerber knife at: http://beargryllsknife2010.blogspot.com/

My Links : Hunting Knife Reviews

All About Knife Sharpening

Years ago, the only kind of knife sharpening there was was on a bench stone. They do still exist, but there are many more kinds of sharpeners available now for just about any kind of knife or tool. The kind of knife sharpener you choose will be determined by the kinds of things you need to sharpen.

Grinding Wheels

A grinding wheel is a solid piece of abrasive stone that cuts away some of the material to reveal a sharper edge. Many different kinds of abrasive materials can be used in a grinding wheel. Aluminum oxide is the most common material and comes in different grades of oxide, differentiated by a coding system of a letter and a number. This is the best material for sharpening such hard materials as annealed iron, wrought iron, steel or bronze.

A combination that yields a very durable wheel is zirconium oxide and aluminum, known as zircon alumina. This is the second most common material for grinding, after aluminum oxide, and is a very good material for steels and alloys.

A new development in materials for grinding is ceramic aluminum oxide. This is an extremely strong material that is ideal when a great deal of precision is required. Ceramic aluminum may be blended with another material to a desired abrasiveness, depending on the item that has to be sharpened.
Grinding wheels come in many shapes, with the straight wheel being the most common. A straight wheel has a cutting edge that faces front. A cylinder wheel is a drum shaped wheel, with a wide surface to cut on, on the front of the cylinder.

Grit size is very important when you have to choose the right wheel for a sharpening job. The higher the number, the finer the grit, so that a grit of 10 or 20 will be very course, and a grit of 100 or 200 will be much finer. A fine grit grinder is used for finishing work.

Bench Grinder

The old standby of a bench grinder is still the most dependable and inexpensive way to sharpen knives as well as cutters, hand tools or drill bits. A bench grinder can be mounted on a workbench to make it easier to use. The wheels can vary in size from 6 to 10 inch diameters, and usually have a motor that is 1/3 to one horsepower. The best kinds will have a place to rest the tool so it remains steady.

Chain Saw Sharpeners

These are specialized sharpeners that are used specifically for chain saws. If you use your chain saw a lot, you may want to own one. There are automatic ones the lock the chain in place when the wheel is lowered, then each tooth is set into the sharpener at an angle; the head is pulled up each time and moved to the next tooth. This will assure uniformity. Manual sharpeners are much less expensive and with proper use can be very precise. The manual lever locks the chain in place while each tooth is filed. Since many manual chain saw sharpeners come with more than one wheel, they can be used with different chains.

The essayist Ray Walberg is specifically interested in subjects relating to honing. You might discover his publications on knife sharpening at http://www.insidewoodworking.com and different sources for knife sharpening information.

See Also : Hunting Knife Review Fighting Knife Review

Apartment Dwellers - You Need This Fantastic New Power Tool

Ever try to use a circular saw in an apartment?

What a hassle!

Full size power tools are not only big and cumbersome...they are loud! Really loud .

I know my neighbors wouldn't appreciate it much if I started cutting some wood in the middle of my apartment.

But what do you do if you like work on small do-it-yourself projects? The solution most people come up with is to use a rotary tool such as a Dremel.

This really doesn't work well for several reasons:

1. The cutting disks always shatter and break

2. It takes forever to cut something such as a piece of wood

3. They are awkward to hold

4. It's hard to get a nice straight cut

Here's the solution:

Mini Circular Saws

If you haven't heard of them, these little suckers are amazing!

They are just like full size circular saws, but have a much smaller blade, are lightweight, easy to store and are much quieter .

They also come in cordless models.

Mini circular saws are perfect for small projects around your home or apartment and will make short cutting work of almost any material. Wood, tile, carpet, plastic, drywall...heck you can even use them out in the garden to prune some small branches or bushes!

What I really like about them is that they solve all the rotary tool issues I listed above and are just plain efficient.

These saws are made by all of the top brands: Craftsman, Makita, etc. If you have a particular tool brand that you like, chances are that they also make a mini circular saw.

Where to Find More Information?

Check out my site that is all about Mini Circular Saws.

It has further information about them as well as info on the Makita circular saw lineup.

Visit : Fighting Knife Review Hunting Knife Reviews Tactical Knife

What is a Metal Saw?

There are several metal saws on the market today. We will discuss the four most popular types of metal saws. I will answer the question what is a metal saw and how they are used. What is a metal saw? It is a saw designed to cut different types of metal. It is capable of sawing through solid metal pipes, aluminum rails, and even copper. All metal saws have one main purpose, and that is to cut certain types of metal for building, and mostly are used in construction settings.

Most contractors will explain to you what is a metal saw, and what they will use them for. The saws are used in residential and commercial building use. They are used to cut different metals for different installations. There is a specific metal saw that cut only certain metals. So if you have a particular metal that needs to be cut, you can rent this tool for home use.

The first saw we need to discuss is the hack saw, and what is a metal saw. This is a metal saw that cuts electrical piping when electrical cord is pulled through. It is also designed to cut thin gauge metal plumbing pipe. One last use is to cut threaded metal rods. This type of rod is used for suspending plumbing piping from concrete ceilings.

What is the metal chop saw? It has a round blade, and cuts solid pipes such as rebar. Rebar is placed in concrete to strengthen the concrete material. There are three blade saws that are used with the chop saw. The blade sizes are a ten inch blade, a twelve inch blade and the last is the fourteen inch size blade. If you choose to use the larger blades, you will be able to cut larger sized pipes.

The band saw, what is a metal band saw? The band saw will cut metal I beams. The I beam is shaped in a capital I and it supports metal framed buildings. Another use of this saw is that it cuts large diameter metal piping which is used for water treatment plants. The pipes are also used for electrical power plates. An electrical power plate is the way the band saw cuts the pipe, it is a level straight cut making welding pipes together easier.

The last saw we will learn about today is the aluminum chop saw. The name of the saw explains exactly what this saw is used for, and that is only to cut aluminum. This saw is used for two main things, to cut aluminum railing to build screen rooms, as well as cutting gutters for the outside eaves of your home. This saw is used primarily used by professionals in construction building work.

So what is a metal saw? At this point you have been shown what a metal saw is and four different metal saws and what they can and can not saw through. It is all about using the right saw for the right metal type. All metal saws will cut through metal as if it were butter. As you are doing your research before you need a metal saw, learn everything you can about the specific saw that you need. Lastly consult a professional, and even hire a professional to do this job for you.

A metal cutting saw is extremely useful for applications where regular saws just won't do the job. To learn more about these tools, pleas visit http://www.metalcuttingsaw.net.

Friends Link : Best Tactical Knifes Tactical Knife Tactical Knifes

Finding The Best Knife

Knife is one of the necessary utility in our daily life. There are various types of knives available in the market. Many numbers of knife makers are there to build in exclusive design that you are looking to purchase. Here is the article for you providing the best information on knives and different knife makers with a brief description. Even you should not forget to find out each one of these exclusive knifes at their own website comfortably.

Al Warren - The famous knife maker Mr. Warren exercises the finest techniques and products to design his products that will endure the test of time and durability to help you to perform your tasks that you expect the results.

Arctic Circle - It will be wise to invest on Arctic Circle knife liners for a quality handmade product that will endure the test of time. These products are really very effective in your expecting results.

Center Cross - Center Cross knife liners has been in the business for over 25 years with their excellent designs. Significantly these knives have also withstood the test of time and durability for the customers. Their experts are getting someone who has not only created the products time and time again.

Glenn Waters - Almost from 15 years as a knife maker Glenn Waters has the knowledge of the process to being an artful knife maker exclusively. For their outstanding products sets them apart from the rest of the knife industry.

Morrow Custom Knives - If you are willing to invest on the Morrow Custom Knives then you will get utmost satisfaction. In fact these knives are available in a slightly higher price than other knives.

Rocket Knives - You will get excellent satisfaction with a greater appreciation from Rocket Knives. And you will be helped by "how to" tutorials to understand the knife making process with sufficient satisfaction.

You can search on internet for all these designers and makers which are readily available and accessible. But you should not forget to be careful while choosing to do business on internet though it is a part of our lives. In fact the internet is still up above the old Wild West.

There are many numbers of different knife makers who produces excellent design of knives for the through out national retailers or internet customers. They only focused to the customers demand. Al Warren is the best example for the choosy knife selection which you will get a help from this article to make a quality decision. Make sure that what is important to you in the knife purchase and in your decision.

Al Warren is the respected industry in the community world of knife line which provides custom quality knives. Mr. Warren applies the finest methods and products to design his products for durability to help you to complete the tasks for your desired results. You will get a quality product from a well respected, personally accountable and reliable designer with much peace and comfort.

You can get information about all his designed products are tested by Al himself on his website to realize just what it is that you are buying from your pocket. Al Warren provides guaranteed the most durable and high quality woods and steels in the world. So Al Warren knife is the best for your choose. They simply focused on a personal basis to create just what you are looking for in a knife for your wants and needs by this competent and respected designer only for your willingness.

So visit their website to get a good product for what is obtainable to you from Mr. Warren. You can get the on-demand availability of knives on the internet the most out of your experience by taking advantages.

HotDealShare.com - the best deals website with hot deals, sweepstakes, free coupons, food deals [http://www.hotdealshare.com/food-deals], promotional offers, bargains, discount prices, internet deals from hundreds of merchants. Updated daily!

Friends Link : Tactical Knifes Fighting Knife Review

Some Interesting Facts About Knives

We all know that a knife is made up of a blade and a handle, and that to get a really good knife takes a certain skill in creating and sharpening the blade. If you have ever seen the components of a knife before it was manufactured, you would be surprised that it doesn't look very much like the end product at all. If you have ever been curious about how a knife is made, this article will be interesting to you, since it will explain the process of heating the metal, finishing the product and creating a knife one can be proud to own, all from a bit of steel and a properly formed handle.

The finish is the most important stage of a good knife. The creation of a jeweled metal knife starts from the inside to create the beauty you will eventually see on the outside. A special kind of finish is a stonewash finish that gives the knife a "used" look from the day you buy it by putting some abrasive marks on it. This creates an older, seasoned look that is the way you want a knife to look, not like it is in the hands of an amateur. Or you can get a knife with a vibed finish, which means that it will have smaller abrasions than the stonewash finish to look slightly worn.

In order to have the strongest, most easy to use knife as possible, the manufacturer should use teh process of annealing. This is a process whereby the metal is brought to the highest possible heat before it is cooled. Annealing is the process used to make the best knives, but it will also make them more expensive since it is a difficult process to achieve. The next heating process for making knives is hardening, which is similar to the annealing process but is a variation that will allow the metal to be heated up and then cooled. Tempering is then used to control the level of cooling of the metals after it has either been annealed or hardened.

The standard definition of stainless steel is when the chromium content is greater than 13% of the metal. This is what makes it stainless. This is a bit of a misnomer, because this does not mean that the steel will never rust or degrade in quality, just that it will take a longer time than with metals where less chromium is used. It seems contrary to want a knife that will rust or degrade, but the problem is that non stainless steel blades are stronger and more durable, so the idea is to have the exact mix of a metal that will be strong but not rust easily. Less chromium will make the blade stronger, but more susceptible to rust, and more chromium will make it less susceptible to rust but not as strong. Damasucus steel is a combination of two or more metals to make the steel extra strong, but it also is made with a special style that creates a beautiful patterned surface that is very popular in custome made knives.

The writer Kurt Schefken is especially interested in information like sharpening and sharpening stones. Writing for documents, the writer established his depth of understanding on information corresponding to knife sharpeners.

Thanks To : Fighting Knife Reviews Hunting Knife Reviews

Crocodile Dundee Knife - What Kind is It?

"That's not a knife, now THIS is a knife!" Remember that quote from the Crocodile Dundee movie? Although they probably weren't the best movies ever made, they did spark some interest from the public and were pretty popular in the 80's! With that popularity came a bit of speculation from knife fanatics around the world as to Crocodile Dundee knife.

Since then, there has been much speculation as to what the Crocodile Dundee Knife type is. And, many collectors and enthusiasts have also been searching for a place to purchase one for their collection. Let's take a look at what type of knife it is, and them maybe it'll be easier to find a place to purchase one!

At first glance, the Crocodile Dundee knife is an impressive, large piece of cutlery. It's unmistakable shape and blade size hints that it may be a large-game type of hunting knife. But is it?

Much debate has been thrown around, and the vast majority of knife collectors would classify it in the Bowie Knife category. We would agree with that, and I'll tell you why!

Bowie knive's signature shape and size is the major reason why the Crocodile Dundee Knife would fit in this classification. It has an enourmous blade which looks to be at least 10 inches long, and it's handle is that of a typical Bowie knife. The fact that he's using it in the "Outback" would also suggest that it falls into the hunting category, which most/all Bowie knives fall into.

Obviously, there's no true way to accurately classify where the Crocodile Dundee Knife belongs without a proper manufacturer's name. You can search the internet, but you'll be hard pressed to find out who actually produced the knife or where it originally came from. All we know, is that it's truely a piece of American (or Australian...for that matter) cinematic history. We can see why these knives are so popular, and finding a replica may not be hard to do now that you know what category to start looking in!

If you're a collector or knife enthusiast that's looking for a good Bowie or Hunting knife, you may want to check out Affordable Knives. We have some great deals on all types of knives...and even movie-type knives such as the Bowie Hunting Knives and Rambo Knives!

Recommend : Hunting Knife Review

Ipe Wood For the Great Outdoors

Most people that are thinking of investing in outdoor furniture realize that in a few years they will be doing this all over again because most products simply do not fare well when exposed to the elements. That's why choosing furniture made with Ipe wood makes such good sense. Ipe products are long lasting and wear extremely well. The initial investment made in Ipe products pays for itself because this is a purchase that truly only has to be made once in a lifetime. That is simply something that cannot be said for most outdoor products.

Ipe wood products are so durable due to the wood from which they are constructed. Ipe is a tropical hard wood with properties that are similar to Teak wood but at a fraction of the cost. The botanical name for Ipe (pronounced EE-pay) is Tabebuia spp. (Lapacho group). Other common names for it include Brazilian Walnut, Amapa, Cortex, and Ironwood. It is found primarily in Central and South America as well as some parts of Asia. This exotic hardwood is naturally resistant to rot and insects. The trees themselves generally grow to about 100 feet in height, with naturally straight grain. The grain is also extremely tight, giving the wood incredible density. Ipe wood is so dense that it actually sinks in water. Tests conducted by the U.S. Naval Research Laboratory give it the highest rating for insect resistance - 15 years in ground without attack by termites. Left untreated Ipe wood is known to last 40+ years, the lifespan when treated with a deck oil applied to the surface is up to 100 years. This is one kind of patio furniture that you won't have to worry about replacing anytime soon.

Although Ipe is used in outdoor furniture construction, that's not its only use. Ipe wood is used for decking as well. When Atlantic City needed to replace its famous boardwalk, Ipe wood was chosen for the job. The Treasure Island Resort in Las Vegas used Ipe as well for its boardwalk. Beyond insect and rot resistance, Ipe wood is also extremely fire resistant. For the Flame Spread (10 min) test given by the National Fire Protection Code, Ipe received a rating of 0, that's the same rating as concrete. Another asset when using Ipe wood for decking is its natural slip resistance. Ipe decking exceeds the Americans with Disabilities Act requirements for Static Coefficient for friction in a wet environment. This is particularly important when used around swimming pools and other areas that tend to stay wet.

Ipe wood is also a renewable resource. Reputable companies dealing with Ipe wood harvest the trees from managed forests to ensure a minimal impact on the environment. Aggressive replanting programs exist to ensure that Ipe wood is truly a renewable resource and harvesting is done in an ecologically responsible manner. Ipe wood is not an endangered species and much of the Ipe wood available in the United States is harvested through sustainable forestry practices, which offer the best remedy for exploitative deforestation.

So whether you are looking for outdoor furniture that will hold its looks and value for decades or decking for that new patio so that the family can enjoy the great outdoors for many summers to come, products made from Ipe wood are an great value. It's an investment that you can feel good about making.

Ronnie Tanner is a contributing writer at Everlasting Hardwoods. He writes about Ipe Decking and other related industry specific topics for Everlasting Hardwoods

Visit : Best Tactical Knifes Tactical Knife Tactical Knifes